diff --git a/homeassistant/components/accuweather/translations/sensor.pl.json b/homeassistant/components/accuweather/translations/sensor.pl.json
index 68d7f8ac8e..cc7ba9b873 100644
--- a/homeassistant/components/accuweather/translations/sensor.pl.json
+++ b/homeassistant/components/accuweather/translations/sensor.pl.json
@@ -1,9 +1,9 @@
 {
     "state": {
         "accuweather__pressure_tendency": {
-            "falling": "Spada",
-            "rising": "Ro\u015bnie",
-            "steady": "Bez zmian"
+            "falling": "spada",
+            "rising": "ro\u015bnie",
+            "steady": "bez zmian"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/braviatv/translations/it.json b/homeassistant/components/braviatv/translations/it.json
index 8ac0b2d7df..7bf9bb98b5 100644
--- a/homeassistant/components/braviatv/translations/it.json
+++ b/homeassistant/components/braviatv/translations/it.json
@@ -3,7 +3,9 @@
         "abort": {
             "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato",
             "no_ip_control": "Il controllo IP \u00e8 disabilitato sulla TV o la TV non \u00e8 supportata.",
-            "not_bravia_device": "Il dispositivo non \u00e8 una TV Bravia."
+            "not_bravia_device": "Il dispositivo non \u00e8 una TV Bravia.",
+            "reauth_successful": "La nuova autenticazione \u00e8 stata eseguita correttamente",
+            "reauth_unsuccessful": "La nuova autenticazione non ha avuto esito positivo, rimuovere l'integrazione e configurarla di nuovo."
         },
         "error": {
             "cannot_connect": "Impossibile connettersi",
@@ -23,6 +25,13 @@
             "confirm": {
                 "description": "Vuoi iniziare la configurazione?"
             },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "Codice PIN",
+                    "use_psk": "Usa l'autenticazione PSK"
+                },
+                "description": "Inserisci il codice PIN mostrato sul Sony Bravia TV. \n\nSe il codice PIN non viene visualizzato, devi annullare la registrazione di Home Assistant sulla TV, vai su: Impostazioni -> Rete -> Impostazioni dispositivo remoto -> Annulla registrazione dispositivo remoto. \n\nPuoi usare PSK (Pre-Shared-Key) invece del PIN. PSK \u00e8 una chiave segreta definita dall'utente utilizzata per il controllo degli accessi. Questo metodo di autenticazione \u00e8 consigliato poich\u00e9 pi\u00f9 stabile. Per abilitare PSK sulla tua TV, vai su: Impostazioni -> Rete -> Configurazione rete domestica -> Controllo IP. Quindi seleziona la casella \u00abUtilizza l'autenticazione PSK\u00bb e inserisci la tua chiave PSK anzich\u00e9 il PIN."
+            },
             "user": {
                 "data": {
                     "host": "Host"
diff --git a/homeassistant/components/generic/translations/id.json b/homeassistant/components/generic/translations/id.json
index 5222c111c5..8cc0ca6aef 100644
--- a/homeassistant/components/generic/translations/id.json
+++ b/homeassistant/components/generic/translations/id.json
@@ -45,6 +45,13 @@
                     "verify_ssl": "Verifikasi sertifikat SSL"
                 },
                 "description": "Masukkan pengaturan untuk terhubung ke kamera."
+            },
+            "user_confirm_still": {
+                "data": {
+                    "confirmed_ok": "Gambar ini terlihat bagus."
+                },
+                "description": "![Pratinjau Gambar Diam Kamera]({preview_url})",
+                "title": "Pratinjau"
             }
         }
     },
diff --git a/homeassistant/components/generic/translations/it.json b/homeassistant/components/generic/translations/it.json
index 14d4b6e872..a06dca30df 100644
--- a/homeassistant/components/generic/translations/it.json
+++ b/homeassistant/components/generic/translations/it.json
@@ -45,6 +45,13 @@
                     "verify_ssl": "Verifica il certificato SSL"
                 },
                 "description": "Inserisci le impostazioni per connetterti alla fotocamera."
+            },
+            "user_confirm_still": {
+                "data": {
+                    "confirmed_ok": "Questa immagine sembra buona."
+                },
+                "description": "![Anteprima immagine fissa fotocamera]({preview_url})",
+                "title": "Anteprima"
             }
         }
     },
diff --git a/homeassistant/components/generic/translations/pl.json b/homeassistant/components/generic/translations/pl.json
index 71c5014895..50de1532da 100644
--- a/homeassistant/components/generic/translations/pl.json
+++ b/homeassistant/components/generic/translations/pl.json
@@ -45,6 +45,13 @@
                     "verify_ssl": "Weryfikacja certyfikatu SSL"
                 },
                 "description": "Wprowad\u017a ustawienia, aby po\u0142\u0105czy\u0107 si\u0119 z kamer\u0105."
+            },
+            "user_confirm_still": {
+                "data": {
+                    "confirmed_ok": "Ten obraz wygl\u0105da dobrze."
+                },
+                "description": "![Podgl\u0105d nieruchomego obrazu z kamery]({preview_url})",
+                "title": "Podgl\u0105d"
             }
         }
     },
diff --git a/homeassistant/components/generic/translations/ru.json b/homeassistant/components/generic/translations/ru.json
index 022af07b58..ad7126d85b 100644
--- a/homeassistant/components/generic/translations/ru.json
+++ b/homeassistant/components/generic/translations/ru.json
@@ -45,6 +45,13 @@
                     "verify_ssl": "\u041f\u0440\u043e\u0432\u0435\u0440\u044f\u0442\u044c \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442 SSL"
                 },
                 "description": "\u0412\u0432\u0435\u0434\u0438\u0442\u0435 \u0434\u0430\u043d\u043d\u044b\u0435 \u0434\u043b\u044f \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f \u043a \u043a\u0430\u043c\u0435\u0440\u0435."
+            },
+            "user_confirm_still": {
+                "data": {
+                    "confirmed_ok": "\u042d\u0442\u043e \u0438\u0437\u043e\u0431\u0440\u0430\u0436\u0435\u043d\u0438\u0435 \u0432\u044b\u0433\u043b\u044f\u0434\u0438\u0442 \u0445\u043e\u0440\u043e\u0448\u043e."
+                },
+                "description": "![\u041f\u0440\u0435\u0434\u0432\u0430\u0440\u0438\u0442\u0435\u043b\u044c\u043d\u044b\u0439 \u043f\u0440\u043e\u0441\u043c\u043e\u0442\u0440 \u0441\u0442\u0430\u0442\u0438\u0447\u043d\u043e\u0433\u043e \u0438\u0437\u043e\u0431\u0440\u0430\u0436\u0435\u043d\u0438\u044f \u0441 \u043a\u0430\u043c\u0435\u0440\u044b]({preview_url})",
+                "title": "\u041f\u0440\u0435\u0434\u0432\u0430\u0440\u0438\u0442\u0435\u043b\u044c\u043d\u044b\u0439 \u043f\u0440\u043e\u0441\u043c\u043e\u0442\u0440"
             }
         }
     },
diff --git a/homeassistant/components/google_sheets/translations/it.json b/homeassistant/components/google_sheets/translations/it.json
index 296899ad74..4a63c95e4a 100644
--- a/homeassistant/components/google_sheets/translations/it.json
+++ b/homeassistant/components/google_sheets/translations/it.json
@@ -27,7 +27,7 @@
                 "title": "Scegli il metodo di autenticazione"
             },
             "reauth_confirm": {
-                "description": "L'integrazione di Fogli Google deve riautenticare il tuo account",
+                "description": "L'integrazione di Fogli Google deve autenticare nuovamente il tuo account",
                 "title": "Autentica nuovamente l'integrazione"
             }
         }
diff --git a/homeassistant/components/homekit_controller/translations/select.pl.json b/homeassistant/components/homekit_controller/translations/select.pl.json
index 0a59529b6b..7a9139d109 100644
--- a/homeassistant/components/homekit_controller/translations/select.pl.json
+++ b/homeassistant/components/homekit_controller/translations/select.pl.json
@@ -1,9 +1,9 @@
 {
     "state": {
         "homekit_controller__ecobee_mode": {
-            "away": "Poza domem",
-            "home": "W domu",
-            "sleep": "U\u015bpiony"
+            "away": "poza domem",
+            "home": "w domu",
+            "sleep": "u\u015bpiony"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/huawei_lte/translations/fr.json b/homeassistant/components/huawei_lte/translations/fr.json
index 117514985c..e6cddfe006 100644
--- a/homeassistant/components/huawei_lte/translations/fr.json
+++ b/homeassistant/components/huawei_lte/translations/fr.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "Pas un appareil Huawei LTE"
+            "not_huawei_lte": "Pas un appareil Huawei LTE",
+            "reauth_successful": "La r\u00e9-authentification a r\u00e9ussi"
         },
         "error": {
             "connection_timeout": "D\u00e9lai de connexion d\u00e9pass\u00e9",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Mot de passe",
+                    "username": "Nom d'utilisateur"
+                },
+                "description": "Saisissez les informations d'identification permettant d'acc\u00e9der \u00e0 l'appareil.",
+                "title": "R\u00e9-authentifier l'int\u00e9gration"
+            },
             "user": {
                 "data": {
                     "password": "Mot de passe",
diff --git a/homeassistant/components/huawei_lte/translations/hu.json b/homeassistant/components/huawei_lte/translations/hu.json
index e1a2640539..34653dcfb7 100644
--- a/homeassistant/components/huawei_lte/translations/hu.json
+++ b/homeassistant/components/huawei_lte/translations/hu.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "Nem Huawei LTE eszk\u00f6z"
+            "not_huawei_lte": "Nem Huawei LTE eszk\u00f6z",
+            "reauth_successful": "Az \u00fajrahiteles\u00edt\u00e9s sikeres volt."
         },
         "error": {
             "connection_timeout": "Kapcsolat id\u0151t\u00fall\u00e9p\u00e9s",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Jelsz\u00f3",
+                    "username": "Felhaszn\u00e1l\u00f3n\u00e9v"
+                },
+                "description": "Adja meg az eszk\u00f6z hozz\u00e1f\u00e9r\u00e9si hiteles\u00edt\u0151 adatait.",
+                "title": "Integr\u00e1ci\u00f3 \u00fajrahiteles\u00edt\u00e9se"
+            },
             "user": {
                 "data": {
                     "password": "Jelsz\u00f3",
diff --git a/homeassistant/components/huawei_lte/translations/id.json b/homeassistant/components/huawei_lte/translations/id.json
index ac925d0b46..5bb08d626d 100644
--- a/homeassistant/components/huawei_lte/translations/id.json
+++ b/homeassistant/components/huawei_lte/translations/id.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "Bukan perangkat Huawei LTE"
+            "not_huawei_lte": "Bukan perangkat Huawei LTE",
+            "reauth_successful": "Autentikasi ulang berhasil"
         },
         "error": {
             "connection_timeout": "Tenggang waktu terhubung habis",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Kata Sandi",
+                    "username": "Nama Pengguna"
+                },
+                "description": "Masukkan kredensial akses perangkat.",
+                "title": "Autentikasi Ulang Integrasi"
+            },
             "user": {
                 "data": {
                     "password": "Kata Sandi",
diff --git a/homeassistant/components/huawei_lte/translations/it.json b/homeassistant/components/huawei_lte/translations/it.json
index 6a90b67d30..9db6aea063 100644
--- a/homeassistant/components/huawei_lte/translations/it.json
+++ b/homeassistant/components/huawei_lte/translations/it.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "Non \u00e8 un dispositivo Huawei LTE"
+            "not_huawei_lte": "Non \u00e8 un dispositivo Huawei LTE",
+            "reauth_successful": "La nuova autenticazione \u00e8 stata eseguita correttamente"
         },
         "error": {
             "connection_timeout": "Timeout di connessione",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Password",
+                    "username": "Nome utente"
+                },
+                "description": "Immettere le credenziali di accesso al dispositivo.",
+                "title": "Autentica nuovamente l'integrazione"
+            },
             "user": {
                 "data": {
                     "password": "Password",
diff --git a/homeassistant/components/huawei_lte/translations/ja.json b/homeassistant/components/huawei_lte/translations/ja.json
index c3b41fbbcf..25cf9d1b0e 100644
--- a/homeassistant/components/huawei_lte/translations/ja.json
+++ b/homeassistant/components/huawei_lte/translations/ja.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "Huawei LTE\u30c7\u30d0\u30a4\u30b9\u3067\u306f\u3042\u308a\u307e\u305b\u3093"
+            "not_huawei_lte": "Huawei LTE\u30c7\u30d0\u30a4\u30b9\u3067\u306f\u3042\u308a\u307e\u305b\u3093",
+            "reauth_successful": "\u518d\u8a8d\u8a3c\u306b\u6210\u529f\u3057\u307e\u3057\u305f"
         },
         "error": {
             "connection_timeout": "\u63a5\u7d9a\u30bf\u30a4\u30e0\u30a2\u30a6\u30c8",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "\u30d1\u30b9\u30ef\u30fc\u30c9",
+                    "username": "\u30e6\u30fc\u30b6\u30fc\u540d"
+                },
+                "description": "\u30c7\u30d0\u30a4\u30b9\u306e\u30a2\u30af\u30bb\u30b9\u8a8d\u8a3c\u60c5\u5831\u3092\u5165\u529b\u3057\u307e\u3059\u3002",
+                "title": "\u7d71\u5408\u306e\u518d\u8a8d\u8a3c"
+            },
             "user": {
                 "data": {
                     "password": "\u30d1\u30b9\u30ef\u30fc\u30c9",
diff --git a/homeassistant/components/huawei_lte/translations/pl.json b/homeassistant/components/huawei_lte/translations/pl.json
index 76e7c92a01..1f66183a76 100644
--- a/homeassistant/components/huawei_lte/translations/pl.json
+++ b/homeassistant/components/huawei_lte/translations/pl.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "To nie jest urz\u0105dzenie Huawei LTE"
+            "not_huawei_lte": "To nie jest urz\u0105dzenie Huawei LTE",
+            "reauth_successful": "Ponowne uwierzytelnienie powiod\u0142o si\u0119"
         },
         "error": {
             "connection_timeout": "Przekroczono limit czasu pr\u00f3by po\u0142\u0105czenia",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "Has\u0142o",
+                    "username": "Nazwa u\u017cytkownika"
+                },
+                "description": "Wprowad\u017a dane uwierzytelniaj\u0105ce dost\u0119pu do urz\u0105dzenia.",
+                "title": "Ponownie uwierzytelnij integracj\u0119"
+            },
             "user": {
                 "data": {
                     "password": "Has\u0142o",
diff --git a/homeassistant/components/huawei_lte/translations/ru.json b/homeassistant/components/huawei_lte/translations/ru.json
index 6c27673b55..feb6209cc8 100644
--- a/homeassistant/components/huawei_lte/translations/ru.json
+++ b/homeassistant/components/huawei_lte/translations/ru.json
@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "not_huawei_lte": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e \u043d\u0435 \u044f\u0432\u043b\u044f\u0435\u0442\u0441\u044f \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e\u043c Huawei LTE"
+            "not_huawei_lte": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e \u043d\u0435 \u044f\u0432\u043b\u044f\u0435\u0442\u0441\u044f \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e\u043c Huawei LTE",
+            "reauth_successful": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430 \u0443\u0441\u043f\u0435\u0448\u043d\u043e."
         },
         "error": {
             "connection_timeout": "\u0418\u0441\u0442\u0435\u043a\u043b\u043e \u0432\u0440\u0435\u043c\u044f \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f.",
@@ -15,6 +16,14 @@
         },
         "flow_title": "{name}",
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "password": "\u041f\u0430\u0440\u043e\u043b\u044c",
+                    "username": "\u0418\u043c\u044f \u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u0442\u0435\u043b\u044f"
+                },
+                "description": "\u0412\u0432\u0435\u0434\u0438\u0442\u0435 \u0434\u0430\u043d\u043d\u044b\u0435 \u0434\u043b\u044f \u0434\u043e\u0441\u0442\u0443\u043f\u0430 \u043a \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443.",
+                "title": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f"
+            },
             "user": {
                 "data": {
                     "password": "\u041f\u0430\u0440\u043e\u043b\u044c",
diff --git a/homeassistant/components/media_player/translations/pl.json b/homeassistant/components/media_player/translations/pl.json
index 886cb07f93..8eb1accf33 100644
--- a/homeassistant/components/media_player/translations/pl.json
+++ b/homeassistant/components/media_player/translations/pl.json
@@ -20,7 +20,7 @@
     },
     "state": {
         "_": {
-            "buffering": "Buforowanie",
+            "buffering": "buforowanie",
             "idle": "nieaktywny",
             "off": "wy\u0142.",
             "on": "w\u0142.",
diff --git a/homeassistant/components/nest/translations/it.json b/homeassistant/components/nest/translations/it.json
index 73095bf093..6cdfa35b19 100644
--- a/homeassistant/components/nest/translations/it.json
+++ b/homeassistant/components/nest/translations/it.json
@@ -52,7 +52,7 @@
                 "data": {
                     "project_id": "ID progetto di accesso al dispositivo"
                 },
-                "description": "Crea un progetto di accesso al dispositivo Nest la cui configurazione **richiede una commissione di  5 $ USD**.\n 1. Vai alla [Console di accesso al dispositivo]({device_access_console_url}) e attraverso il flusso di pagamento.\n 2. Clicca su **Crea progetto**\n 3. Assegna un nome al progetto di accesso al dispositivo e fai clic su **Avanti**.\n 4. Inserisci il tuo ID Client OAuth\n 5. Abilita gli eventi facendo clic su **Abilita** e **Crea progetto**. \n\nInserisci il tuo ID progetto di accesso al dispositivo di seguito ([maggiori informazioni]({more_info_url})).\n",
+                "description": "Crea un progetto di accesso al dispositivo Nest la cui configurazione **richiede una commissione di 5 $ USD**.\n 1. Vai alla [Console di accesso al dispositivo]({device_access_console_url}) e attraverso il flusso di pagamento.\n 2. Clicca su **Crea progetto**\n 3. Assegna un nome al progetto di accesso al dispositivo e fai clic su **Avanti**.\n 4. Inserisci il tuo ID Client OAuth\n 5. Abilita gli eventi facendo clic su **Abilita** e **Crea progetto**. \n\nInserisci il tuo ID progetto di accesso al dispositivo di seguito ([maggiori informazioni]({more_info_url})).\n",
                 "title": "Nest: crea un progetto di accesso al dispositivo"
             },
             "device_project_upgrade": {
diff --git a/homeassistant/components/overkiz/translations/el.json b/homeassistant/components/overkiz/translations/el.json
index e9862479c2..eb308c470d 100644
--- a/homeassistant/components/overkiz/translations/el.json
+++ b/homeassistant/components/overkiz/translations/el.json
@@ -12,7 +12,8 @@
             "too_many_attempts": "\u03a0\u03ac\u03c1\u03b1 \u03c0\u03bf\u03bb\u03bb\u03ad\u03c2 \u03c0\u03c1\u03bf\u03c3\u03c0\u03ac\u03b8\u03b5\u03b9\u03b5\u03c2 \u03bc\u03b5 \u03bc\u03b7 \u03ad\u03b3\u03ba\u03c5\u03c1\u03bf \u03b4\u03b9\u03b1\u03ba\u03c1\u03b9\u03c4\u03b9\u03ba\u03cc, \u03c0\u03c1\u03bf\u03c3\u03c9\u03c1\u03b9\u03bd\u03ac \u03b1\u03c0\u03bf\u03ba\u03bb\u03b5\u03b9\u03c3\u03bc\u03ad\u03bd\u03b5\u03c2",
             "too_many_requests": "\u03a0\u03ac\u03c1\u03b1 \u03c0\u03bf\u03bb\u03bb\u03ac \u03b1\u03b9\u03c4\u03ae\u03bc\u03b1\u03c4\u03b1, \u03c0\u03c1\u03bf\u03c3\u03c0\u03b1\u03b8\u03ae\u03c3\u03c4\u03b5 \u03be\u03b1\u03bd\u03ac \u03b1\u03c1\u03b3\u03cc\u03c4\u03b5\u03c1\u03b1",
             "unknown": "\u0391\u03c0\u03c1\u03cc\u03c3\u03bc\u03b5\u03bd\u03bf \u03c3\u03c6\u03ac\u03bb\u03bc\u03b1",
-            "unknown_user": "\u0386\u03b3\u03bd\u03c9\u03c3\u03c4\u03bf\u03c2 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7\u03c2. \u039f\u03b9 \u03bb\u03bf\u03b3\u03b1\u03c1\u03b9\u03b1\u03c3\u03bc\u03bf\u03af Somfy Protect \u03b4\u03b5\u03bd \u03c5\u03c0\u03bf\u03c3\u03c4\u03b7\u03c1\u03af\u03b6\u03bf\u03bd\u03c4\u03b1\u03b9 \u03b1\u03c0\u03cc \u03b1\u03c5\u03c4\u03ae \u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7."
+            "unknown_user": "\u0386\u03b3\u03bd\u03c9\u03c3\u03c4\u03bf\u03c2 \u03c7\u03c1\u03ae\u03c3\u03c4\u03b7\u03c2. \u039f\u03b9 \u03bb\u03bf\u03b3\u03b1\u03c1\u03b9\u03b1\u03c3\u03bc\u03bf\u03af Somfy Protect \u03b4\u03b5\u03bd \u03c5\u03c0\u03bf\u03c3\u03c4\u03b7\u03c1\u03af\u03b6\u03bf\u03bd\u03c4\u03b1\u03b9 \u03b1\u03c0\u03cc \u03b1\u03c5\u03c4\u03ae \u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7.",
+            "unsupported_hardware": "\u03a4\u03bf \u03c5\u03bb\u03b9\u03ba\u03cc \u03c3\u03b1\u03c2 {unsupported_device} \u03b4\u03b5\u03bd \u03c5\u03c0\u03bf\u03c3\u03c4\u03b7\u03c1\u03af\u03b6\u03b5\u03c4\u03b1\u03b9 \u03b1\u03c0\u03cc \u03b1\u03c5\u03c4\u03ae\u03bd \u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7."
         },
         "flow_title": "\u03a0\u03cd\u03bb\u03b7: {gateway_id}",
         "step": {
diff --git a/homeassistant/components/overkiz/translations/en.json b/homeassistant/components/overkiz/translations/en.json
index 2c534a64cb..d7dcd2a79a 100644
--- a/homeassistant/components/overkiz/translations/en.json
+++ b/homeassistant/components/overkiz/translations/en.json
@@ -12,6 +12,7 @@
             "too_many_attempts": "Too many attempts with an invalid token, temporarily banned",
             "too_many_requests": "Too many requests, try again later",
             "unknown": "Unexpected error",
+            "unknown_user": "Unknown user. Somfy Protect accounts are not supported by this integration.",
             "unsupported_hardware": "Your {unsupported_device} hardware is not supported by this integration."
         },
         "flow_title": "Gateway: {gateway_id}",
diff --git a/homeassistant/components/overkiz/translations/select.pl.json b/homeassistant/components/overkiz/translations/select.pl.json
index 0989aec66f..b925c0f5de 100644
--- a/homeassistant/components/overkiz/translations/select.pl.json
+++ b/homeassistant/components/overkiz/translations/select.pl.json
@@ -1,13 +1,13 @@
 {
     "state": {
         "overkiz__memorized_simple_volume": {
-            "highest": "Najwy\u017csze",
-            "standard": "Normalnie"
+            "highest": "najwy\u017csze",
+            "standard": "normalnie"
         },
         "overkiz__open_closed_pedestrian": {
-            "closed": "Zamkni\u0119ta",
-            "open": "Otwarte",
-            "pedestrian": "Pieszy"
+            "closed": "zamkni\u0119ta",
+            "open": "otwarte",
+            "pedestrian": "pieszy"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/plugwise/translations/select.es.json b/homeassistant/components/plugwise/translations/select.es.json
index c08ee07b64..38fcab309d 100644
--- a/homeassistant/components/plugwise/translations/select.es.json
+++ b/homeassistant/components/plugwise/translations/select.es.json
@@ -1,6 +1,8 @@
 {
     "state": {
         "plugwise__regulation_mode": {
+            "bleeding_cold": "Purgando fr\u00edo",
+            "bleeding_hot": "Purgando caliente",
             "cooling": "Refrigeraci\u00f3n",
             "heating": "Calefacci\u00f3n",
             "off": "Apagado"
diff --git a/homeassistant/components/plugwise/translations/select.id.json b/homeassistant/components/plugwise/translations/select.id.json
new file mode 100644
index 0000000000..0be50360a0
--- /dev/null
+++ b/homeassistant/components/plugwise/translations/select.id.json
@@ -0,0 +1,11 @@
+{
+    "state": {
+        "plugwise__regulation_mode": {
+            "bleeding_cold": "Dingin sekali",
+            "bleeding_hot": "Panas sekali",
+            "cooling": "Mendinginkan",
+            "heating": "Memanaskan",
+            "off": "Mati"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/plugwise/translations/select.it.json b/homeassistant/components/plugwise/translations/select.it.json
new file mode 100644
index 0000000000..64f15b3915
--- /dev/null
+++ b/homeassistant/components/plugwise/translations/select.it.json
@@ -0,0 +1,11 @@
+{
+    "state": {
+        "plugwise__regulation_mode": {
+            "bleeding_cold": "Sfiatamento freddo",
+            "bleeding_hot": "Sfiatamento caldo",
+            "cooling": "Raffreddamento",
+            "heating": "Riscaldamento",
+            "off": "Spento"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/plugwise/translations/select.pl.json b/homeassistant/components/plugwise/translations/select.pl.json
new file mode 100644
index 0000000000..120801ff71
--- /dev/null
+++ b/homeassistant/components/plugwise/translations/select.pl.json
@@ -0,0 +1,11 @@
+{
+    "state": {
+        "plugwise__regulation_mode": {
+            "bleeding_cold": "strasznie zimno",
+            "bleeding_hot": "strasznie ciep\u0142o",
+            "cooling": "ch\u0142odzenie",
+            "heating": "grzanie",
+            "off": "wy\u0142."
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/plugwise/translations/select.ru.json b/homeassistant/components/plugwise/translations/select.ru.json
new file mode 100644
index 0000000000..a72746cc98
--- /dev/null
+++ b/homeassistant/components/plugwise/translations/select.ru.json
@@ -0,0 +1,9 @@
+{
+    "state": {
+        "plugwise__regulation_mode": {
+            "cooling": "\u041e\u0445\u043b\u0430\u0436\u0434\u0435\u043d\u0438\u0435",
+            "heating": "\u041e\u0431\u043e\u0433\u0440\u0435\u0432",
+            "off": "\u0412\u044b\u043a\u043b\u044e\u0447\u0435\u043d\u043e"
+        }
+    }
+}
\ No newline at end of file
diff --git a/homeassistant/components/rtsp_to_webrtc/translations/it.json b/homeassistant/components/rtsp_to_webrtc/translations/it.json
index c91e0bc34e..319bdaafbd 100644
--- a/homeassistant/components/rtsp_to_webrtc/translations/it.json
+++ b/homeassistant/components/rtsp_to_webrtc/translations/it.json
@@ -23,5 +23,14 @@
                 "title": "Configura RTSPtoWebRTC"
             }
         }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data": {
+                    "stun_server": "Indirizzo del server Stun (host:porta)"
+                }
+            }
+        }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/tuya/translations/select.pl.json b/homeassistant/components/tuya/translations/select.pl.json
index d75bbd8a8b..109b62a6e3 100644
--- a/homeassistant/components/tuya/translations/select.pl.json
+++ b/homeassistant/components/tuya/translations/select.pl.json
@@ -1,12 +1,12 @@
 {
     "state": {
         "tuya__basic_anti_flickr": {
-            "0": "Wy\u0142\u0105czone",
+            "0": "wy\u0142\u0105czone",
             "1": "50 Hz",
             "2": "60 Hz"
         },
         "tuya__basic_nightvision": {
-            "0": "Automatycznie",
+            "0": "automatycznie",
             "1": "wy\u0142.",
             "2": "w\u0142."
         },
@@ -17,19 +17,19 @@
             "4h": "4 godziny",
             "5h": "5 godzin",
             "6h": "6 godzin",
-            "cancel": "Anuluj"
+            "cancel": "anuluj"
         },
         "tuya__curtain_mode": {
-            "morning": "Ranek",
-            "night": "Noc"
+            "morning": "ranek",
+            "night": "noc"
         },
         "tuya__curtain_motor_mode": {
-            "back": "Do ty\u0142u",
-            "forward": "Do przodu"
+            "back": "do ty\u0142u",
+            "forward": "do przodu"
         },
         "tuya__decibel_sensitivity": {
-            "0": "Niska czu\u0142o\u015b\u0107",
-            "1": "Wysoka czu\u0142o\u015b\u0107"
+            "0": "niska czu\u0142o\u015b\u0107",
+            "1": "wysoka czu\u0142o\u015b\u0107"
         },
         "tuya__fan_angle": {
             "30": "30\u00b0",
@@ -37,61 +37,61 @@
             "90": "90\u00b0"
         },
         "tuya__fingerbot_mode": {
-            "click": "Naci\u015bni\u0119cie",
-            "switch": "Prze\u0142\u0105cznik"
+            "click": "naci\u015bni\u0119cie",
+            "switch": "prze\u0142\u0105cznik"
         },
         "tuya__humidifier_level": {
-            "level_1": "Poziom 1",
-            "level_10": "Poziom 10",
-            "level_2": "Poziom 2",
-            "level_3": "Poziom 3",
-            "level_4": "Poziom 4",
-            "level_5": "Poziom 5",
-            "level_6": "Poziom 6",
-            "level_7": "Poziom 7",
-            "level_8": "Poziom 8",
-            "level_9": "Poziom 9"
+            "level_1": "poziom 1",
+            "level_10": "poziom 10",
+            "level_2": "poziom 2",
+            "level_3": "poziom 3",
+            "level_4": "poziom 4",
+            "level_5": "poziom 5",
+            "level_6": "poziom 6",
+            "level_7": "poziom 7",
+            "level_8": "poziom 8",
+            "level_9": "poziom 9"
         },
         "tuya__humidifier_moodlighting": {
-            "1": "Nastr\u00f3j 1",
-            "2": "Nastr\u00f3j 2",
-            "3": "Nastr\u00f3j 3",
-            "4": "Nastr\u00f3j 4",
-            "5": "Nastr\u00f3j 5"
+            "1": "nastr\u00f3j 1",
+            "2": "nastr\u00f3j 2",
+            "3": "nastr\u00f3j 3",
+            "4": "nastr\u00f3j 4",
+            "5": "nastr\u00f3j 5"
         },
         "tuya__humidifier_spray_mode": {
-            "auto": "Auto",
-            "health": "Zdrowotny",
-            "humidity": "Wilgotno\u015b\u0107",
-            "sleep": "U\u015bpiony",
+            "auto": "automatyczny",
+            "health": "zdrowotny",
+            "humidity": "wilgotno\u015b\u0107",
+            "sleep": "u\u015bpiony",
             "work": "Praca"
         },
         "tuya__ipc_work_mode": {
-            "0": "Tryb niskiego poboru mocy",
-            "1": "Tryb pracy ci\u0105g\u0142ej"
+            "0": "tryb niskiego poboru mocy",
+            "1": "tryb pracy ci\u0105g\u0142ej"
         },
         "tuya__led_type": {
-            "halogen": "Halogen",
-            "incandescent": "Jarzeni\u00f3wka",
+            "halogen": "halogen",
+            "incandescent": "jarzeni\u00f3wka",
             "led": "LED"
         },
         "tuya__light_mode": {
             "none": "wy\u0142.",
-            "pos": "Wska\u017c lokalizacj\u0119 prze\u0142\u0105cznika",
-            "relay": "Wska\u017c stan w\u0142./wy\u0142."
+            "pos": "wska\u017c lokalizacj\u0119 prze\u0142\u0105cznika",
+            "relay": "wska\u017c stan w\u0142./wy\u0142."
         },
         "tuya__motion_sensitivity": {
-            "0": "Niska czu\u0142o\u015b\u0107",
-            "1": "\u015arednia czu\u0142o\u015b\u0107",
-            "2": "Wysoka czu\u0142o\u015b\u0107"
+            "0": "niska czu\u0142o\u015b\u0107",
+            "1": "\u015brednia czu\u0142o\u015b\u0107",
+            "2": "wysoka czu\u0142o\u015b\u0107"
         },
         "tuya__record_mode": {
-            "1": "Nagrywaj tylko zdarzenia",
-            "2": "Nagrywanie ci\u0105g\u0142e"
+            "1": "nagrywaj tylko zdarzenia",
+            "2": "nagrywanie ci\u0105g\u0142e"
         },
         "tuya__relay_status": {
-            "last": "Zapami\u0119taj ostatni stan",
-            "memory": "Zapami\u0119taj ostatni stan",
+            "last": "zapami\u0119taj ostatni stan",
+            "memory": "zapami\u0119taj ostatni stan",
             "off": "wy\u0142.",
             "on": "w\u0142.",
             "power_off": "wy\u0142.",
@@ -99,35 +99,35 @@
         },
         "tuya__vacuum_cistern": {
             "closed": "zamkni\u0119ta",
-            "high": "Du\u017ce",
-            "low": "Ma\u0142e",
-            "middle": "\u015arednie"
+            "high": "du\u017ce",
+            "low": "ma\u0142e",
+            "middle": "\u015brednie"
         },
         "tuya__vacuum_collection": {
-            "large": "Du\u017ce",
-            "middle": "\u015arednie",
-            "small": "Ma\u0142e"
+            "large": "du\u017ce",
+            "middle": "\u015brednie",
+            "small": "ma\u0142e"
         },
         "tuya__vacuum_mode": {
-            "bow": "\u0141uk",
-            "chargego": "Powr\u00f3t do stacji dokuj\u0105cej",
-            "left_bow": "\u0141uk w lewo",
-            "left_spiral": "Spirala w lewo",
-            "mop": "Mop",
-            "part": "Cz\u0119\u015bciowe",
-            "partial_bow": "Cz\u0119\u015bciowy \u0142uk",
-            "pick_zone": "Wybierz stref\u0119",
-            "point": "Punkt",
-            "pose": "Pozycja",
-            "random": "Losowo",
-            "right_bow": "\u0141uk w prawo",
-            "right_spiral": "Spirala w prawo",
-            "single": "Pojedyncze",
-            "smart": "Smart",
-            "spiral": "Spirala",
-            "standby": "Tryb czuwania",
-            "wall_follow": "Wzd\u0142u\u017c \u015bciany",
-            "zone": "Strefa"
+            "bow": "\u0142uk",
+            "chargego": "powr\u00f3t do stacji dokuj\u0105cej",
+            "left_bow": "\u0142uk w lewo",
+            "left_spiral": "spirala w lewo",
+            "mop": "mop",
+            "part": "cz\u0119\u015bciowe",
+            "partial_bow": "cz\u0119\u015bciowy \u0142uk",
+            "pick_zone": "wybierz stref\u0119",
+            "point": "punkt",
+            "pose": "pozycja",
+            "random": "losowo",
+            "right_bow": "\u0142uk w prawo",
+            "right_spiral": "spirala w prawo",
+            "single": "pojedyncze",
+            "smart": "smart",
+            "spiral": "spirala",
+            "standby": "tryb czuwania",
+            "wall_follow": "wzd\u0142u\u017c \u015bciany",
+            "zone": "strefa"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/weather/translations/pl.json b/homeassistant/components/weather/translations/pl.json
index c284c36162..43cc15533e 100644
--- a/homeassistant/components/weather/translations/pl.json
+++ b/homeassistant/components/weather/translations/pl.json
@@ -1,15 +1,15 @@
 {
     "state": {
         "_": {
-            "clear-night": "Pogodna noc",
-            "cloudy": "Pochmurno",
+            "clear-night": "pogodna noc",
+            "cloudy": "pochmurno",
             "exceptional": "warunki nadzwyczajne",
             "fog": "mg\u0142a",
             "hail": "grad",
             "lightning": "b\u0142yskawice",
             "lightning-rainy": "burza",
             "partlycloudy": "cz\u0119\u015bciowe zachmurzenie",
-            "pouring": "Ulewa",
+            "pouring": "ulewa",
             "rainy": "deszczowo",
             "snowy": "opady \u015bniegu",
             "snowy-rainy": "\u015bnieg z deszczem",
diff --git a/homeassistant/components/wled/translations/select.pl.json b/homeassistant/components/wled/translations/select.pl.json
index 381f2306d2..20017c51c4 100644
--- a/homeassistant/components/wled/translations/select.pl.json
+++ b/homeassistant/components/wled/translations/select.pl.json
@@ -3,7 +3,7 @@
         "wled__live_override": {
             "0": "wy\u0142.",
             "1": "w\u0142.",
-            "2": "Do czasu ponownego uruchomienia urz\u0105dzenia"
+            "2": "do czasu ponownego uruchomienia urz\u0105dzenia"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/xiaomi_miio/translations/select.pl.json b/homeassistant/components/xiaomi_miio/translations/select.pl.json
index 92a1539b9c..09197cc33f 100644
--- a/homeassistant/components/xiaomi_miio/translations/select.pl.json
+++ b/homeassistant/components/xiaomi_miio/translations/select.pl.json
@@ -1,9 +1,9 @@
 {
     "state": {
         "xiaomi_miio__display_orientation": {
-            "forward": "Do przodu",
-            "left": "W lewo",
-            "right": "W prawo"
+            "forward": "do przodu",
+            "left": "w lewo",
+            "right": "w prawo"
         },
         "xiaomi_miio__led_brightness": {
             "bright": "jasne",
@@ -11,9 +11,9 @@
             "off": "wy\u0142\u0105czone"
         },
         "xiaomi_miio__ptc_level": {
-            "high": "Wysoki",
-            "low": "Niski",
-            "medium": "\u015aredni"
+            "high": "wysoki",
+            "low": "niski",
+            "medium": "\u015bredni"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/yamaha_musiccast/translations/select.pl.json b/homeassistant/components/yamaha_musiccast/translations/select.pl.json
index a6e9bde7c4..ee42d8a74f 100644
--- a/homeassistant/components/yamaha_musiccast/translations/select.pl.json
+++ b/homeassistant/components/yamaha_musiccast/translations/select.pl.json
@@ -1,38 +1,38 @@
 {
     "state": {
         "yamaha_musiccast__dimmer": {
-            "auto": "Automatyczny"
+            "auto": "automatyczny"
         },
         "yamaha_musiccast__zone_equalizer_mode": {
-            "auto": "Automatycznie",
-            "bypass": "Pomijanie",
-            "manual": "R\u0119cznie"
+            "auto": "automatycznie",
+            "bypass": "pomijanie",
+            "manual": "r\u0119cznie"
         },
         "yamaha_musiccast__zone_link_audio_delay": {
-            "audio_sync": "Synchronizacja d\u017awi\u0119ku",
-            "audio_sync_off": "Synchronizacja d\u017awi\u0119ku wy\u0142\u0105czona",
-            "audio_sync_on": "Synchronizacja d\u017awi\u0119ku w\u0142\u0105czona",
-            "balanced": "Zr\u00f3wnowa\u017cone",
-            "lip_sync": "Synchronizacja ust"
+            "audio_sync": "synchronizacja d\u017awi\u0119ku",
+            "audio_sync_off": "synchronizacja d\u017awi\u0119ku wy\u0142\u0105czona",
+            "audio_sync_on": "synchronizacja d\u017awi\u0119ku w\u0142\u0105czona",
+            "balanced": "zr\u00f3wnowa\u017cone",
+            "lip_sync": "synchronizacja ust"
         },
         "yamaha_musiccast__zone_link_audio_quality": {
-            "compressed": "Skompresowane",
-            "uncompressed": "Nieskompresowane"
+            "compressed": "skompresowane",
+            "uncompressed": "nieskompresowane"
         },
         "yamaha_musiccast__zone_link_control": {
-            "speed": "Pr\u0119dko\u015b\u0107",
-            "stability": "Stabilno\u015b\u0107",
-            "standard": "Normalnie"
+            "speed": "pr\u0119dko\u015b\u0107",
+            "stability": "stabilno\u015b\u0107",
+            "standard": "normalnie"
         },
         "yamaha_musiccast__zone_sleep": {
             "120 min": "120 minut",
             "30 min": "30 minut",
             "60 min": "60 minut",
             "90 min": "90 minut",
-            "off": "Wy\u0142\u0105czone"
+            "off": "wy\u0142\u0105czone"
         },
         "yamaha_musiccast__zone_surr_decoder_type": {
-            "auto": "Automatycznie",
+            "auto": "automatycznie",
             "dolby_pl": "Dolby ProLogic",
             "dolby_pl2x_game": "Dolby ProLogic 2x (Gra)",
             "dolby_pl2x_movie": "Dolby ProLogic 2x (Film)",
@@ -41,12 +41,12 @@
             "dts_neo6_cinema": "DTS Neo:6 (Kino)",
             "dts_neo6_music": "DTS Neo:6 (Muzyka)",
             "dts_neural_x": "DTS Neural:X",
-            "toggle": "Prze\u0142\u0105cz"
+            "toggle": "prze\u0142\u0105cz"
         },
         "yamaha_musiccast__zone_tone_control_mode": {
-            "auto": "Automatyczna",
-            "bypass": "Pomijanie",
-            "manual": "R\u0119czna"
+            "auto": "automatyczna",
+            "bypass": "pomijanie",
+            "manual": "r\u0119czna"
         }
     }
 }
\ No newline at end of file
diff --git a/homeassistant/components/zha/translations/id.json b/homeassistant/components/zha/translations/id.json
index 65f7588cb6..ab496b3be5 100644
--- a/homeassistant/components/zha/translations/id.json
+++ b/homeassistant/components/zha/translations/id.json
@@ -210,6 +210,14 @@
                 "description": "ZHA akan dihentikan.  Ingin melanjutkan?",
                 "title": "Konfigurasi Ulang ZHA"
             },
+            "instruct_unplug": {
+                "description": "Radio lama Anda telah disetel ulang. Jika perangkat keras tidak lagi diperlukan, Anda dapat mencabutnya sekarang.",
+                "title": "Cabut radio lama Anda"
+            },
+            "intent_migrate": {
+                "description": "Radio lama Anda akan disetel ulang ke setelan pabrikan.  Jika Anda menggunakan adaptor gabungan Z-Wave dan Zigbee seperti HUSBZB-1, ini hanya akan mengatur ulang bagian Zigbee.\n\nApakah Anda ingin melanjutkan?",
+                "title": "Migrasikan ke radio baru"
+            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Jenis Radio"
@@ -233,6 +241,14 @@
                 "description": "Cadangan Anda memiliki alamat IEEE yang berbeda dari radio Anda.  Agar jaringan berfungsi dengan baik, alamat IEEE radio Anda juga harus diubah.\n\nOperasi ini bersifat permanen.",
                 "title": "Timpa Alamat IEEE Radio"
             },
+            "prompt_migrate_or_reconfigure": {
+                "description": "Apakah Anda memigrasikan ke radio baru atau mengkonfigurasi ulang radio yang sekarang?",
+                "menu_options": {
+                    "intent_migrate": "Migrasikan ke radio baru",
+                    "intent_reconfigure": "Mengkonfigurasi ulang radio yang sekarang"
+                },
+                "title": "Migrasi atau konfigurasi ulang"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Unggah file"
diff --git a/homeassistant/components/zha/translations/it.json b/homeassistant/components/zha/translations/it.json
index edda54ca6b..02b3549d26 100644
--- a/homeassistant/components/zha/translations/it.json
+++ b/homeassistant/components/zha/translations/it.json
@@ -212,6 +212,14 @@
                 "description": "ZHA verr\u00e0 interrotto. Vuoi continuare?",
                 "title": "Riconfigura ZHA"
             },
+            "instruct_unplug": {
+                "description": "La tua vecchia radio \u00e8 stata ripristinata. Se l'hardware non \u00e8 pi\u00f9 necessario, ora \u00e8 possibile scollegarlo.",
+                "title": "Scollega la tua vecchia radio"
+            },
+            "intent_migrate": {
+                "description": "La tua vecchia radio verr\u00e0 ripristinata alle impostazioni di fabbrica. Se stai usando un adattatore combinato Z-Wave e Zigbee come HUSBZB-1, questo ripristiner\u00e0 solo la parte Zigbee. \n\nVuoi continuare?",
+                "title": "Migra a una nuova radio"
+            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Tipo di radio"
@@ -235,6 +243,14 @@
                 "description": "Il tuo backup ha un indirizzo IEEE diverso dalla tua radio. Affinch\u00e9 la rete funzioni correttamente, \u00e8 necessario modificare anche l'indirizzo IEEE della radio. \n\nQuesta \u00e8 un'operazione permanente.",
                 "title": "Sovrascrivi indirizzo IEEE radio"
             },
+            "prompt_migrate_or_reconfigure": {
+                "description": "Stai migrando a una nuova radio o riconfigurando la radio attuale?",
+                "menu_options": {
+                    "intent_migrate": "Migra a una nuova radio",
+                    "intent_reconfigure": "Riconfigura la radio attuale"
+                },
+                "title": "Migrare o riconfigurare"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Carica un file"
diff --git a/homeassistant/components/zha/translations/pl.json b/homeassistant/components/zha/translations/pl.json
index 5928e60a13..b2046848f0 100644
--- a/homeassistant/components/zha/translations/pl.json
+++ b/homeassistant/components/zha/translations/pl.json
@@ -212,6 +212,14 @@
                 "description": "ZHA zostanie zatrzymany. Czy chcesz kontynuowa\u0107?",
                 "title": "Zmiana konfiguracji ZHA"
             },
+            "instruct_unplug": {
+                "description": "Tw\u00f3j stary typ radia zosta\u0142 zresetowany. Je\u015bli sprz\u0119t nie jest ju\u017c potrzebny, mo\u017cesz go teraz od\u0142\u0105czy\u0107.",
+                "title": "Od\u0142\u0105cz stary typ radia"
+            },
+            "intent_migrate": {
+                "description": "Twoje stare radio zostanie zresetowane do ustawie\u0144 fabrycznych. Je\u015bli u\u017cywasz po\u0142\u0105czonego adaptera Z-Wave i Zigbee, takiego jak HUSBZB-1, zresetuje to tylko cz\u0119\u015b\u0107 Zigbee. \n\nCzy chcesz kontynuowa\u0107?",
+                "title": "Migracja do nowego typu radia"
+            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Typ radia"
@@ -235,6 +243,14 @@
                 "description": "Twoja kopia zapasowa ma inny adres IEEE ni\u017c twoje radio. Aby sie\u0107 dzia\u0142a\u0142a prawid\u0142owo, nale\u017cy r\u00f3wnie\u017c zmieni\u0107 adres IEEE radia. \n\nTo jest trwa\u0142a operacja.",
                 "title": "Nadpisanie adresu IEEE radia"
             },
+            "prompt_migrate_or_reconfigure": {
+                "description": "Czy migrujesz do nowego typu radia czy ponownie konfigurujesz obecne radio?",
+                "menu_options": {
+                    "intent_migrate": "Migracja do nowego",
+                    "intent_reconfigure": "Ponowna konfiguracja"
+                },
+                "title": "Migracja czy ponowna konfiguracja"
+            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Prze\u015blij plik"