Some routers will lowercase all the hostnames. Since we
already lowercase hostnames for matching purposes, we now
pass the lowercased hostname to the integration.
Currently only roomba cared about this, and has been adjusted.
* Simplify maxcube integration
Device objects returned by maxcube-api dependency are stable, so
we do not need to resolve from the device address every time.
Also, refactor and unify how maxcube integration sets temperature & mode.
* Raise ValueError if missing parameters for set_temperature method
Raise a ValueError exception If set_temperature does not receive
a temperature parameter.
Also, document properly _set_target method.
* Use Type | None instead of Optional[Type] annotation
* Protect set_hvac_mode and set_preset_mode from unsupported parameters
* Change modbus configuration to new style.
The old (frozen) configuration is still supported, but when detected a big
warning is issued that it will soon be removed. This allows users to change
their configuration at their pace.
Clean configuration SCHEMAs and move common modbus parts
to MODBUS_SCHEMA (renamed from BASE_SCHEMA).
Add BASE_COMPONENT_SCHEMA to ensure common configuration of components.
All component define e.g. NAME, move these to a common schema.
change components (binary_sensor, sensor, switch) to new config
Add test set for modbus itself (old config and discovery_info).
Add test of devices discovery_info configuration
* Update discovery_info configuration for binary_sensor.
* Update discovery_info configuration for sensor.
* Update discovery_info configuration for switch.
* Review comments.
* update due to change in core
* flake8 problem.
* Correct log message.
* add should_poll property.
* Fix polling for Modbus binary sensor
* Fix polling for Modbus sensor
* Fix polling for Modbus switch
* Fix switch.
* Fix pytest errors.
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/binary_sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/modbus.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/sensor.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ToogleEntity -> SwitchEntity and add abastract
* Update homeassistant/components/modbus/switch.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update tests/components/modbus/test_init.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* removed if/else in test.
* Remove other if.
Co-authored-by: Vladimir Zahradnik <vladimir@zahradnik.io>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* ZHA lock code services and events
* ZHA Locks: A few more services, use the library functions
* Catch exception when command id is not in command list
* Add tests for lock code services
* Add tests for enable/disable
* Better document code slot ID shifting
* Simplify cluster commands
* Simplify maxcube integration
Device objects returned by maxcube-api dependency are stable, so
we do not need to resolve from the device address every time.
Also, refactor and unify how maxcube integration sets temperature & mode.
* Add tests for maxcube component
* Use homeassistant.util.utcnow to retrieve current time
* Revert "Simplify maxcube integration"
This reverts commit 84d231d5bdfda9b7744d371d3025986b637a6a8b.
* Make test pass again after rolling back integration changes
* git push --all origin
* Fix percentage to ordered list conversion
* Tests for mqtt fan and fixes
* Improve tests and error handling base config
* Additional tests
* Tests completed, small fixes
* Allow preset mode and percentages combined
* Remove raise in setup and update tests
* Alignment with fan entity mode
* Fix pylint for len-as-condition
* Remove python binary cache file from PR
* Additional tests on async_turn_on and fix
* Added comments for deprecation of speeds
* Schema checks before init
* Optimize pre schema checks
* Correct schema checks
* Update homeassistant/components/mqtt/abbreviations.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Comment speeds for mqtt fan are deprecated not needed here
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Warnings for exceptions - testing speed_range
* Update homeassistant/components/mqtt/abbreviations.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Update homeassistant/components/mqtt/fan.py
* Save with black
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Add tests for Netatmo data handler
* Clean up coveragerc
* Move block to fixture
* Minor update
* Remove tests of implementation details for data handler
* Update homeassistant/components/netatmo/data_handler.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/netatmo/data_handler.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Import callback
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add tests for Netatmo sensor
* Fix coveragerc
* Remove freezegun dependency
* Use f-strings instead of string concatenation
* Update tests/components/netatmo/test_sensor.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* Address comment on config options test
* Replace deprecated call to async_get_registry()
* Fix public weather sensor update test
* Clean up
* Prevent division by zero
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add proper percentage support to deCONZ fan integration
* Properly convert speed to percentage
* Remove disabled method
* Replace convert_speed with a dict
* Increase test coverage of deCONZ device triggers
* Revert removed new line
* Found a way to explicitly assert that exceptions are raised
* Remove unnecessary block till done
* Fix unnecessary elif
* Fix review comments
* Remove helper tests
* Remove login details before logging stream source
* Convert to str before re
* Use compiled RE
* Add tests and filter log message in worker
* Update import
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* isort
Co-authored-by: Erik Montnemery <erik@montnemery.com>
