* Add MVP
* Remove unused code
* Fix
* Add force back
* Fix tests
* Storage keyed
* Error out when storage doesnt find config
* Use old load_yaml
* Set config for panel correct
* Use instance cache var
* Make config option
* Set lock status correctly for Schlage BE469 Z-Wave locks
PR #17386 attempted to improve the state of z-wave lock tracking for
some problematic models. However, it operated under a flawed
assumptions. Namely, that we can always trust `self.values` to have
fresh data, and that the Schlage BE469 sends alarm reports after every
lock event. We can't trust `self.values`, and the Schlage is very
broken. :)
When we receive a notification from the driver about a state change,
we call `update_properties` - but we can (and do!) have _stale_
properties left over from previous updates. #17386 really works best
if you start from a clean slate each time. However, `update_properties`
is called on every value update, and we don't get a reason why.
Moreover, values that weren't just refreshed are not removed. So blindly
looking at something like `self.values.access_control` when deciding to
apply a workaround is not going to always be correct - it may or may not
be, depending on what happened in the past.
For the sad case of the BE469, here are the Z-Wave events that happen
under various circumstances:
RF Lock / Unlock:
- Send: door lock command set
- Receive: door lock report
- Send: door lock command get
- Receive: door lock report
Manual lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Keypad lock / Unlock:
- Receive: alarm
- Send: door lock command get
- Receive: door lock report
Thus, this PR introduces yet another work around - we track the current
and last z-wave command that the driver saw, and make assumptions based
on the sequence of events. This seems to be the most reliable way to go
- simply asking the driver to refresh various states doesn't clear out
alarms the way you would expect; this model doesn't support the access
control logging commands; and trying to manually clear out alarm state
when calling RF lock/unlock was tricky.
The lock state, when the z-wave network restarts, may look out of sync
for a few minutes. However, after the full network restart is complete,
everything looks good in my testing.
* Fix linter
* Fix unavailable
Change setting to unavailable when getting request exceptions only after 1 minute has past since 1st occurrence.
* Put common code in _check_state_available
Put common code to determine if available should be set to False in method _check_state_available
* remove the need to have query feature support
Some InfluxDB servers don't have /query support feature but are still valid servers for storing data.
Usually those servers are proxies to others timeseries databases.
The change proposes to still validate the configuration but with less requirements on the server side.
* `.query` call is replaced by `.write_points`
* no more query call in the influxdb component. remove test
* reset mock after the setup and before the test
* remove unused import
* reset mock stats after component setup
* Add new events for automation trigger and script run, fix context for image processing, add tests to ensure same context
* remove custom logbook entry for automation and add new automation event to logbook
* code review updates
* Allow verisure locks to be configured with a default code
* linting fix
* PR feedback
* PR feedback - try harder to prevent future typos
A python mock is a magical thing, and will respond to basicaly
any method you call on it. It's somewhat better to assert against
an explicit variable named 'mock', rather than to assert on the
method name you wanted to mock... could prevent a typo from messing up
tests.
* PR feedback: convert tests to integration-style tests
Set up a fake verisure hub, stub out a _lot_ of calls, then test
after platform discovery and service calls.
It should be noted that we're overriding the `update()` calls in
these tests. This was done to prevent even further mocking of
the verisure hub's responses.
Hopefully, this'll be a foundation for people to write more tests.
* more pr feedback
The `Config` object specific to the `google_assistant` component
had a default value for `allow_unlock`. We were not overriding this
default when constructing the Config object during `google_assistant`
component setup, whereas we do when setting up the `cloud` component.
To fix, we thread the `allow_unlock` parameter down through http setup,
and ensure that it's set correctly. Moreover, we also change the
ordering of the `Config` parameters, and remove the default. Future
refactoring should not miss it, as it is now a required parameter.
* added additional filters
Added base64_encode, base64_decode and ordinal filters.
* added test cases
added test cases for base64_encode, base64_decode and ordinal filters.
* forgot to add filters :)
* Create test for platform
Created test for platform.
Added media_stop to common.py test
* Multiple improvements
Fixed lint issue in common.py
Fixed lint issues in test_directv.py
Improved patching import using modile_patcher.start() and stop()
Added asserts for service calls.
* Updates based on Martin's review
Updates based on Martin's review.
* Updated test based on PR#18474
Updated test to use service play_media instead of select_source based on change from PR18474
* Lint issues
Lint issues
* Further updates based on feedback
Updates based on feedback provided.
* Using async_load_platform for discovery test
Using async_load_platform for discovery tests.
Added asserts to ensure entities are created with correct names.
* Used HASS event_loop to setup component
Use HASS event_loop to setup the component async.
* Updated to use state machine for # entities
Updated to use state machine to count # entities instead of entities.
* Use hass.loop instead of getting current loop
Small update to use hass.loop instead, thanks Martin!
* Forgot to remove asyncio
Removed asyncio import.
* Added fixtures
Added fixtures.
* Remove not needed updates and assertions
* Return mocked dtv instance from side_effect
* Fix return correct fixture instance
* Clean up assertions
* Fix remaining patches
* Mock time when setting up component in fixture
* Patch time correctly
* Attribute _last_update should return utcnow
* Added Entur departure information sensor.
* Fixed houndci-bot comments.
* Removed tailing whitespace.
* Fixed some comments from tox lint.
* Improved docstring, i think.
* Fix for C1801
* Unit test for entur platform setup
* Rewritten entur component to have pypi dependecy.
* Propper client id for api usage.
* Minor cleanup of usage of constants.
* Made location output configurable.
* Cleaned up usage of constants.
* Moved logic to be contained within setup or update methods.
* Moved icon consts to root in module.
* Using config directly in test
* Minor changes
* Store state last seen time separately
This ensures that infrequently updated entities aren't accidentally
dropped from the restore states store
* Fix mock restore cache
* Add support for Mode trait in Google Assistant.
* Simplify supported logic.
* Fix SUPPORTED_MODE_SETTINGS to correct rip failures.
* more stray commas
* update tests.
* Fix statistics for binary sensor
-) Binary sensors have 'on' and 'off' for state resulting in issue as numbers were expected. Fixed so that it works with non-numeric states as well.
-) Added check to skip unknown states.
-) Updates test so that binary sensor test will use non-numeric values for states.
* Using guard clause and changed debug to error
Changed to use a guard clause for state unknown.
Writing error on value error instead of debug.
* Add docstring
* Restore states through a JSON store
* Accept entity_id directly in restore state helper
* Keep states stored between runs for a limited time
* Remove warning
* Enable Google Assistant OnOffTrait for climate devices that support them
This commit enables the OnOffTrait for climate devices that have the SUPPORT_ON_OFF feature. I have tested this locally with a Sensibo device which supports ON_OFF and a nest device that does not.
* Update trait.py
* Add tests for onoff_climate
* Add OnOff trait to climate.heatpump
* Add on status to heatpump in google_assistant tests
* code cleanup to make use of new externalised feed manager
* fixed lint
* revert change, keep asynctest
* using asynctest
* changed unit test from mocking to inspecting dispatcher signals
* code clean-up
