* Climate 1.0 / part 1/2/3 * fix flake * Lint * Update Google Assistant * ambiclimate to climate 1.0 (#24911) * Fix Alexa * Lint * Migrate zhong_hong * Migrate tuya * Migrate honeywell to new climate schema (#24257) * Update one * Fix model climate v2 * Cleanup p4 * Add comfort hold mode * Fix old code * Update homeassistant/components/climate/__init__.py Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io> * Update homeassistant/components/climate/const.py Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io> * First renaming * Rename operation to hvac for paulus * Rename hold mode to preset mode * Cleanup & update comments * Remove on/off * Fix supported feature count * Update services * Update demo * Fix tests & use current_hvac * Update comment * Fix tests & add typing * Add more typing * Update modes * Fix tests * Cleanup low/high with range * Update homematic part 1 * Finish homematic * Fix lint * fix hm mapping * Support simple devices * convert lcn * migrate oem * Fix xs1 * update hive * update mil * Update toon * migrate deconz * cleanup * update tesla * Fix lint * Fix vera * Migrate zwave * Migrate velbus * Cleanup humity feature * Cleanup * Migrate wink * migrate dyson * Fix current hvac * Renaming * Fix lint * Migrate tfiac * migrate tado * Fix PRESET can be None * apply PR#23913 from dev * remove EU component, etc. * remove EU component, etc. * ready to test now * de-linted * some tweaks * de-lint * better handling of edge cases * delint * fix set_mode typos * apply PR#23913 from dev * remove EU component, etc. * ready to test now * de-linted * some tweaks * de-lint * better handling of edge cases * delint * fix set_mode typos * delint, move debug code * away preset now working * code tidy-up * code tidy-up 2 * code tidy-up 3 * address issues #18932, #15063 * address issues #18932, #15063 - 2/2 * refactor MODE_AUTO to MODE_HEAT_COOL and use F not C * add low/high to set_temp * add low/high to set_temp 2 * add low/high to set_temp - delint * run HA scripts * port changes from PR #24402 * manual rebase * manual rebase 2 * delint * minor change * remove SUPPORT_HVAC_ACTION * Migrate radiotherm * Convert touchline * Migrate flexit * Migrate nuheat * Migrate maxcube * Fix names maxcube const * Migrate proliphix * Migrate heatmiser * Migrate fritzbox * Migrate opentherm_gw * Migrate venstar * Migrate daikin * Migrate modbus * Fix elif * Migrate Homematic IP Cloud to climate-1.0 (#24913) * hmip climate fix * Update hvac_mode and preset_mode * fix lint * Fix lint * Migrate generic_thermostat * Migrate incomfort to new climate schema (#24915) * initial commit * Update climate.py * Migrate eq3btsmart * Lint * cleanup PRESET_MANUAL * Migrate ecobee * No conditional features * KNX: Migrate climate component to new climate platform (#24931) * Migrate climate component * Remove unused code * Corrected line length * Lint * Lint * fix tests * Fix value * Migrate geniushub to new climate schema (#24191) * Update one * Fix model climate v2 * Cleanup p4 * Add comfort hold mode * Fix old code * Update homeassistant/components/climate/__init__.py Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io> * Update homeassistant/components/climate/const.py Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io> * First renaming * Rename operation to hvac for paulus * Rename hold mode to preset mode * Cleanup & update comments * Remove on/off * Fix supported feature count * Update services * Update demo * Fix tests & use current_hvac * Update comment * Fix tests & add typing * Add more typing * Update modes * Fix tests * Cleanup low/high with range * Update homematic part 1 * Finish homematic * Fix lint * fix hm mapping * Support simple devices * convert lcn * migrate oem * Fix xs1 * update hive * update mil * Update toon * migrate deconz * cleanup * update tesla * Fix lint * Fix vera * Migrate zwave * Migrate velbus * Cleanup humity feature * Cleanup * Migrate wink * migrate dyson * Fix current hvac * Renaming * Fix lint * Migrate tfiac * migrate tado * delinted * delinted * use latest client * clean up mappings * clean up mappings * add duration to set_temperature * add duration to set_temperature * manual rebase * tweak * fix regression * small fix * fix rebase mixup * address comments * finish refactor * fix regression * tweak type hints * delint * manual rebase * WIP: Fixes for honeywell migration to climate-1.0 (#24938) * add type hints * code tidy-up * Fixes for incomfort migration to climate-1.0 (#24936) * delint type hints * no async unless await * revert: no async unless await * revert: no async unless await 2 * delint * fix typo * Fix homekit_controller on climate-1.0 (#24948) * Fix tests on climate-1.0 branch * As part of climate-1.0, make state return the heating-cooling.current characteristic * Fixes from review * lint * Fix imports * Migrate stibel_eltron * Fix lint * Migrate coolmaster to climate 1.0 (#24967) * Migrate coolmaster to climate 1.0 * fix lint errors * More lint fixes * Fix demo to work with UI * Migrate spider * Demo update * Updated frontend to 20190705.0 * Fix boost mode (#24980) * Prepare Netatmo for climate 1.0 (#24973) * Migration Netatmo * Address comments * Update climate.py * Migrate ephember * Migrate Sensibo * Implemented review comments (#24942) * Migrate ESPHome * Migrate MQTT * Migrate Nest * Migrate melissa * Initial/partial migration of ST * Migrate ST * Remove Away mode (#24995) * Migrate evohome, cache access tokens (#24491) * add water_heater, add storage - initial commit * add water_heater, add storage - initial commit delint add missing code desiderata update honeywell client library & CODEOWNER add auth_tokens code, refactor & delint refactor for broker delint * Add Broker, Water Heater & Refactor add missing code desiderata * update honeywell client library & CODEOWNER add auth_tokens code, refactor & delint refactor for broker * bugfix - loc_idx may not be 0 more refactor - ensure pure async more refactoring appears all r/o attributes are working tweak precsion, DHW & delint remove unused code remove unused code 2 remove unused code, refactor _save_auth_tokens() * support RoundThermostat bugfix opmode, switch to util.dt, add until=1h revert breaking change * store at_expires as naive UTC remove debug code delint tidy up exception handling delint add water_heater, add storage - initial commit delint add missing code desiderata update honeywell client library & CODEOWNER add auth_tokens code, refactor & delint refactor for broker add water_heater, add storage - initial commit delint add missing code desiderata update honeywell client library & CODEOWNER add auth_tokens code, refactor & delint refactor for broker delint bugfix - loc_idx may not be 0 more refactor - ensure pure async more refactoring appears all r/o attributes are working tweak precsion, DHW & delint remove unused code remove unused code 2 remove unused code, refactor _save_auth_tokens() support RoundThermostat bugfix opmode, switch to util.dt, add until=1h revert breaking change store at_expires as naive UTC remove debug code delint tidy up exception handling delint * update CODEOWNERS * fix regression * fix requirements * migrate to climate-1.0 * tweaking * de-lint * TCS working? & delint * tweaking * TCS code finalised * remove available() logic * refactor _switchpoints() * tidy up switchpoint code * tweak * teaking device_state_attributes * some refactoring * move PRESET_CUSTOM back to evohome * move CONF_ACCESS_TOKEN_EXPIRES CONF_REFRESH_TOKEN back to evohome * refactor SP code and dt conversion * delinted * delinted * remove water_heater * fix regression * Migrate homekit * Cleanup away mode * Fix tests * add helpers * fix tests melissa * Fix nehueat * fix zwave * add more tests * fix deconz * Fix climate test emulate_hue * fix tests * fix dyson tests * fix demo with new layout * fix honeywell * Switch homekit_controller to use HVAC_MODE_HEAT_COOL instead of HVAC_MODE_AUTO (#25009) * Lint * PyLint * Pylint * fix fritzbox tests * Fix google * Fix all tests * Fix lint * Fix auto for homekit like controler * Fix lint * fix lint
215 lines
6.6 KiB
Python
215 lines
6.6 KiB
Python
"""Support for ZhongHong HVAC Controller."""
|
|
import logging
|
|
|
|
import voluptuous as vol
|
|
|
|
from homeassistant.components.climate import PLATFORM_SCHEMA, ClimateDevice
|
|
from homeassistant.components.climate.const import (
|
|
ATTR_HVAC_MODE, HVAC_MODE_COOL, HVAC_MODE_DRY, HVAC_MODE_FAN_ONLY,
|
|
HVAC_MODE_HEAT, SUPPORT_FAN_MODE,
|
|
SUPPORT_TARGET_TEMPERATURE)
|
|
from homeassistant.const import (
|
|
ATTR_TEMPERATURE, CONF_HOST, CONF_PORT, EVENT_HOMEASSISTANT_STOP,
|
|
TEMP_CELSIUS)
|
|
import homeassistant.helpers.config_validation as cv
|
|
from homeassistant.helpers.dispatcher import (
|
|
async_dispatcher_connect, async_dispatcher_send)
|
|
|
|
_LOGGER = logging.getLogger(__name__)
|
|
|
|
CONF_GATEWAY_ADDRRESS = 'gateway_address'
|
|
|
|
DEFAULT_PORT = 9999
|
|
DEFAULT_GATEWAY_ADDRRESS = 1
|
|
|
|
SIGNAL_DEVICE_ADDED = 'zhong_hong_device_added'
|
|
SIGNAL_ZHONG_HONG_HUB_START = 'zhong_hong_hub_start'
|
|
|
|
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
|
|
vol.Required(CONF_HOST): cv.string,
|
|
vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
|
|
vol.Optional(CONF_GATEWAY_ADDRRESS, default=DEFAULT_GATEWAY_ADDRRESS):
|
|
cv.positive_int,
|
|
})
|
|
|
|
SUPPORT_HVAC = [HVAC_MODE_COOL, HVAC_MODE_HEAT, HVAC_MODE_DRY,
|
|
HVAC_MODE_FAN_ONLY]
|
|
|
|
|
|
def setup_platform(hass, config, add_entities, discovery_info=None):
|
|
"""Set up the ZhongHong HVAC platform."""
|
|
from zhong_hong_hvac.hub import ZhongHongGateway
|
|
host = config.get(CONF_HOST)
|
|
port = config.get(CONF_PORT)
|
|
gw_addr = config.get(CONF_GATEWAY_ADDRRESS)
|
|
hub = ZhongHongGateway(host, port, gw_addr)
|
|
devices = [
|
|
ZhongHongClimate(hub, addr_out, addr_in)
|
|
for (addr_out, addr_in) in hub.discovery_ac()
|
|
]
|
|
|
|
_LOGGER.debug("We got %s zhong_hong climate devices", len(devices))
|
|
|
|
hub_is_initialized = False
|
|
|
|
async def startup():
|
|
"""Start hub socket after all climate entity is setted up."""
|
|
nonlocal hub_is_initialized
|
|
if not all([device.is_initialized for device in devices]):
|
|
return
|
|
|
|
if hub_is_initialized:
|
|
return
|
|
|
|
_LOGGER.debug("zhong_hong hub start listen event")
|
|
await hass.async_add_job(hub.start_listen)
|
|
await hass.async_add_job(hub.query_all_status)
|
|
hub_is_initialized = True
|
|
|
|
async_dispatcher_connect(hass, SIGNAL_DEVICE_ADDED, startup)
|
|
|
|
# add devices after SIGNAL_DEVICE_SETTED_UP event is listend
|
|
add_entities(devices)
|
|
|
|
def stop_listen(event):
|
|
"""Stop ZhongHongHub socket."""
|
|
hub.stop_listen()
|
|
|
|
hass.bus.listen_once(EVENT_HOMEASSISTANT_STOP, stop_listen)
|
|
|
|
|
|
class ZhongHongClimate(ClimateDevice):
|
|
"""Representation of a ZhongHong controller support HVAC."""
|
|
|
|
def __init__(self, hub, addr_out, addr_in):
|
|
"""Set up the ZhongHong climate devices."""
|
|
from zhong_hong_hvac.hvac import HVAC
|
|
self._device = HVAC(hub, addr_out, addr_in)
|
|
self._hub = hub
|
|
self._current_operation = None
|
|
self._current_temperature = None
|
|
self._target_temperature = None
|
|
self._current_fan_mode = None
|
|
self.is_initialized = False
|
|
|
|
async def async_added_to_hass(self):
|
|
"""Register callbacks."""
|
|
self._device.register_update_callback(self._after_update)
|
|
self.is_initialized = True
|
|
async_dispatcher_send(self.hass, SIGNAL_DEVICE_ADDED)
|
|
|
|
def _after_update(self, climate):
|
|
"""Handle state update."""
|
|
_LOGGER.debug("async update ha state")
|
|
if self._device.current_operation:
|
|
self._current_operation = self._device.current_operation.lower()
|
|
if self._device.current_temperature:
|
|
self._current_temperature = self._device.current_temperature
|
|
if self._device.current_fan_mode:
|
|
self._current_fan_mode = self._device.current_fan_mode
|
|
if self._device.target_temperature:
|
|
self._target_temperature = self._device.target_temperature
|
|
self.schedule_update_ha_state()
|
|
|
|
@property
|
|
def should_poll(self):
|
|
"""Return the polling state."""
|
|
return False
|
|
|
|
@property
|
|
def name(self):
|
|
"""Return the name of the thermostat, if any."""
|
|
return self.unique_id
|
|
|
|
@property
|
|
def unique_id(self):
|
|
"""Return the unique ID of the HVAC."""
|
|
return "zhong_hong_hvac_{}_{}".format(self._device.addr_out,
|
|
self._device.addr_in)
|
|
|
|
@property
|
|
def supported_features(self):
|
|
"""Return the list of supported features."""
|
|
return SUPPORT_TARGET_TEMPERATURE | SUPPORT_FAN_MODE
|
|
|
|
@property
|
|
def temperature_unit(self):
|
|
"""Return the unit of measurement used by the platform."""
|
|
return TEMP_CELSIUS
|
|
|
|
@property
|
|
def hvac_mode(self):
|
|
"""Return current operation ie. heat, cool, idle."""
|
|
return self._current_operation
|
|
|
|
@property
|
|
def hvac_modes(self):
|
|
"""Return the list of available operation modes."""
|
|
return SUPPORT_HVAC
|
|
|
|
@property
|
|
def current_temperature(self):
|
|
"""Return the current temperature."""
|
|
return self._current_temperature
|
|
|
|
@property
|
|
def target_temperature(self):
|
|
"""Return the temperature we try to reach."""
|
|
return self._target_temperature
|
|
|
|
@property
|
|
def target_temperature_step(self):
|
|
"""Return the supported step of target temperature."""
|
|
return 1
|
|
|
|
@property
|
|
def is_on(self):
|
|
"""Return true if on."""
|
|
return self._device.is_on
|
|
|
|
@property
|
|
def fan_mode(self):
|
|
"""Return the fan setting."""
|
|
return self._current_fan_mode
|
|
|
|
@property
|
|
def fan_modes(self):
|
|
"""Return the list of available fan modes."""
|
|
return self._device.fan_list
|
|
|
|
@property
|
|
def min_temp(self):
|
|
"""Return the minimum temperature."""
|
|
return self._device.min_temp
|
|
|
|
@property
|
|
def max_temp(self):
|
|
"""Return the maximum temperature."""
|
|
return self._device.max_temp
|
|
|
|
def turn_on(self):
|
|
"""Turn on ac."""
|
|
return self._device.turn_on()
|
|
|
|
def turn_off(self):
|
|
"""Turn off ac."""
|
|
return self._device.turn_off()
|
|
|
|
def set_temperature(self, **kwargs):
|
|
"""Set new target temperature."""
|
|
temperature = kwargs.get(ATTR_TEMPERATURE)
|
|
if temperature is not None:
|
|
self._device.set_temperature(temperature)
|
|
|
|
operation_mode = kwargs.get(ATTR_HVAC_MODE)
|
|
if operation_mode is not None:
|
|
self.set_hvac_mode(operation_mode)
|
|
|
|
def set_hvac_mode(self, hvac_mode):
|
|
"""Set new target operation mode."""
|
|
self._device.set_operation_mode(hvac_mode.upper())
|
|
|
|
def set_fan_mode(self, fan_mode):
|
|
"""Set new target fan mode."""
|
|
self._device.set_fan_mode(fan_mode)
|