* Add attributes of ARP table
This adds the device attributes available in the ARP table and a few more. Implementation is inspired by the nmap scanner.
* lint spaces
* Added eco mode option to Ziggo Mediabox XL
* Changed eco_mode_on to eco_mode
* Removed eco_mode option, the player is unavailable when offline
* Timeout on connection, on/off states are handled via update
* Improved state detection and added available property
* Melissa attributes
* overide device_state_attributes rather than state_attributes
* Selected attributes
* Adding current humidity rather than a state_attribute
* Add support for Google Home device tracking.
* Use dict[key] for options.
* Delete googlehome.py.save
* Change stylling of name, and attr mac_address to btle_mac_address, removed unesssesarry attributes copying.
* Add additional property to HomeKitSwitch to show whether the Homekit outlet is in use or not
* Fix issues from review - Remove unused property, simplify and rename the device_state_attributes method
* Add keepalive support
- adds keepalive support
- adds debug messages
- corrects CONF_PHONEBOOK and CONF_PREFIXES constants
* Add keepalive config constant
* Fix default value
* More visual indentation
* move to platform
* Move to platform
* Make keepalive default and remove option
* Forgot a few lines
* Add workaround to use notification state for zwave lock state
There are several zwave lock models out there which do not seem to
update the lock state on non-rf events (see #11934#14632#14534 for
examples) including kwikset smartkey zwave plus locks (which I own).
In these cases it seems that the notifications for non-rf events the
access_control value is updated but not the primary value for the
lock state, which is what is used to set the is_locked property. To
properly have the lock state accurate for all types of notifications
on these models we need to use the access_control field. This commit
adds a workaround for the 4 models reported to exhibit this behavior
so that home-assistant will reliably set the lock state for all
device notifications.
* Add YRD220 as per adrum to workaround list
* Inline constants
* Add support for locks in google assistant component
This is supported by the smarthome API, but there is no documentation
for it. This work is based on an article I found with screenshots of
documentation that was erroneously uploaded:
https://www.androidpolice.com/2018/01/17/google-assistant-home-can-now-natively-control-smart-locks-august-vivint-first-supported/
Google Assistant now supports unlocking certain locks - Nest and August
come to mind - via this API, and this commit allows Home Assistant to
do so as well.
Notably, I've added a config option `allow_unlock` that controls
whether we actually honor requests to unlock a lock via the google
assistant. It defaults to false.
Additionally, we add the functionNotSupported error, which makes a
little more sense when we're unable to execute the desired state
transition.
https://developers.google.com/actions/reference/smarthome/errors-exceptions#exception_list
* Fix linter warnings
* Ensure that certain groups are never exposed to cloud entities
For example, the group.all_locks entity - we should probably never
expose this to third party cloud integrations. It's risky.
This is not configurable, but can be extended by adding to the
cloud.const.NEVER_EXPOSED_ENTITIES array.
It's implemented in a modestly hacky fashion, because we determine
whether or not a entity should be excluded/included in several ways.
Notably, we define this array in the top level const.py, to avoid
circular import problems between the cloud/alexa components.
* Add config flow step for manual input
Remove support for loading discovery config from json file
* Small cleanup
Fix all translations to step user instead of step init
* Revert to using step_init
* Small cleanup
Add test_gateway that was forgotten in a previous PR
* Fix hound comment
* Fix empty pydocstring
Added debug log information for when records are purged and added entity_id to existing debug information to identify the entity the debug information is for.
* Enhancements for DirecTV media player
Following enhancements have been made:
1. Added debug logging
2. Added ability to change channel using select_source service of the remote platform.
3. State will now show paused if a recorded program is paused, for live TV playing will always be returned.
4. Added the following attributes:
a. media_position: current position of the media (in seconds)
b. media_position_updated_at: timestamp when media_position was updated.
c. source: current source (channel).
d. media_isbeingrecorded: if current media is being recorded or not.
e. media_rating: TV/Movie rating of the media
f. media_recorded: if current media is recorded or live TV
g. media_starttime: Timestamp media was aired
Reordered properties to follow same order as how they are in __init__.py of remote platform.
* Fixed error and cleaned up few items
Fixed an issue when determining if a program is recorded or not.
Cleaned up some coding.
* Fix issue in checking if DTV device is already configured
If a DTV device was configured before, then discovery would add this device again seperately if the name specified in the configuration is different from the name on the DTV.
This issue is fixed now. Part of the fix also ensure to allow multiple "primary" devices on the network to be discovered.
Further also added debug logging to the setup_platform.
* Further improvements
Some additional improvements related to handling the DATA_DIRECTV in hass.data.
* Fixed flake8 issue
Fixed flake8 issue
* Added available property
Added available property
* Updated to use get_locations()
Replaced doing the request for getLocations with the get_locations() API from DirectPy instead.
* Fix for checking if device is available
Fix for checking if device is available and small update to debug log message.
* Fixed lint issue
Fixed lint issue with unused variable by adding ingore for it as this is for a enumerate
* Updated try/except and removed available
Updated tr/except having the except by the statement we're doing except on.
Removed available, will be a different PR.
* Updated known_devices to be tupples in a set
Updated known_devices to be a tupple in a set, removing loop to determine if client was already added.
* Enhancements for DirecTV media player
Following enhancements have been made:
1. Added debug logging
2. Added ability to change channel using select_source service of the remote platform.
3. State will now show paused if a recorded program is paused, for live TV playing will always be returned.
4. Added the following attributes:
a. media_position: current position of the media (in seconds)
b. media_position_updated_at: timestamp when media_position was updated.
c. source: current source (channel).
d. media_isbeingrecorded: if current media is being recorded or not.
e. media_rating: TV/Movie rating of the media
f. media_recorded: if current media is recorded or live TV
g. media_starttime: Timestamp media was aired
Reordered properties to follow same order as how they are in __init__.py of remote platform.
* Fixed error and cleaned up few items
Fixed an issue when determining if a program is recorded or not.
Cleaned up some coding.
* Fix issue in checking if DTV device is already configured
If a DTV device was configured before, then discovery would add this device again seperately if the name specified in the configuration is different from the name on the DTV.
This issue is fixed now. Part of the fix also ensure to allow multiple "primary" devices on the network to be discovered.
Further also added debug logging to the setup_platform.
* Further improvements
Some additional improvements related to handling the DATA_DIRECTV in hass.data.
* Fixed flake8 issue
Fixed flake8 issue
* Added available property
Added available property
* Updated to use get_locations()
Replaced doing the request for getLocations with the get_locations() API from DirectPy instead.
* Fix for checking if device is available
Fix for checking if device is available and small update to debug log message.
* Fixed lint issue
Fixed lint issue with unused variable by adding ingore for it as this is for a enumerate
* Updated try/except and removed available
Updated tr/except having the except by the statement we're doing except on.
Removed available, will be a different PR.
* Add available property
Add the available property to the entiry.
* Implemented tplink_lte components and notify service
* Device discovery for the notify component
* Improved the config schema. Small fixes
* Improved login retry mechanism
* Log successful connection only on retries
* Removed CancelledError handlers and small fixes
* Test typing for helpers.__init__ and temperature
* Add type hints to helpers.sun
* Add type hints to helpers.signal
* Add type hints to helpers.entity_values
* Add type hints to helpers.dispatcher
* Refactor mysensors message handling
* Add handler module and register handlers per message type or message
sub-type. This will allow easier extension of message handling in the
future.
* Move some common functions to a helpers module.
* Add node handler and signal
* Fix inconsistent return
* Upgrade pymysensors to 0.18.0
* Fix bug in message modification.
